Textile Testing Equipments

With enegy regulator of following size: 8" DIameter Circular,
10" x 12" Rectangular
12" x 18"

Additional Information:

• Minimum Order Quantity: 01 Piece

Product Details:

Used for counting of end and picksper inch by microscope
Standards; ASTM D 3775-98
ISO 7211, BSEN 1049

Product Details:

Accuracy 0.1 to 0.001 mm
(Manual and Digital)                              .

Product Details:

To check pilling and abrasion of any type of fabrics like Knitted non-woven, woven and coated fabric.
As per Standards ASTM 4966, ISO 4570,  BS 3424

Product Details:

Bursting capacity: 35 Kg.
Testing Fluid: Glycerin
Capacity of Test Fluid tank: 160 ml
Standards: ASTM D 774, 3786, ISO 2758, 2559, 3303.

Product Details:

Bursting Capacity: 35 Kg
Capacity of Test Fluid tank: 160 ml
Capacity: 35 Kg standard ASTM D 3786, ISO 27587, BS3424

Product Details:

Size: 18" x 18" x 18" with digital temperature and controller inside chamber SS 304, out side MS power coated temp.
Range up to 250 degree centigrade used for drying sample.

Product Details:

For checking colour fastness against washing.
Model: 8x550 ml, 8x1200ml, 4x500+4x1200 ml, 8x 550 ml+8x 1200 ml
Double Walled structure filled with glass wool insulation. Fully SS model with programmer for temp. control
Standards: ISO 105, BS 1006, AATCC 28, 61, 86, 132

Product Details:

For colour fastness against rubbing in dry or wet condition with LCD display
Standards: ISO 105 12/DO2 AATCC 8/165, BS 1006 DO2

Product Details:

To check colour fastness against day light by using MBTL light with water cooling arrangement, moving/ fixed drum type.
Standards: IS 2454, BS 1006

Product Details:

Pad and blade not required. 3 Nos. of imported metal cutting wheels for long lasting cutting.

Product Details:

For accurate cut of 1/100 Meter of Fabric standard ASTM D 3776, ISO 3801

Product Details:

500 mm x 500 mm with slot of 350 mm x 350 mm (With scale & marker pen to check shrinkage % of fabrics)
Standard ISO 3759, BS 4931

Product Details:

For visual colour matching of yarn, fabric and garments under different imported light sources like D-65, UV, TL-84, CWF, TL-83, U-30, U-35, Inca A, with Electronic ballast &hour meter metal body without door available standards : ASTM D 1792, ISO 3664, BS 950

Product Details:

To check tear strength of fabric as per ASTM D 1424, BS 4253        .

Product Details:

As per BS 5811, ISO 129454-1 with 8 Nos. Pilling tubes with digital display

Product Details:

Monometer Type
For fabric as per standard IS 11056-1984 DIN 55887   .

Product Details:

Model: 18" x 18" x 24"
Fully SS            .

Product Details:

 Offered products range consists of Environment Testing Instruments, Metal Composition Testing Equipments, and Metal Hardness Testing Equipments. The range manufactured by us is manufactured under the supervision of quality controllers at our vendor’s end. In adding to this, these products are known for their high performance, easy usability, long service life, simple usability, and damage resistance.

Product Details:

Capacity: 3-4 Ltrs per hour 
BS-1006
IS-2454-1985             .

Product Details:

For checking crease recovery of any type of fabric.
Standards: AATCC-66, ISO-2313

Product Details:

To ceck flammability of fabric at 45 angle 
Standards: ASTM D 1230, ,CRF 16-1610

for checking of tensile strength, seam slippage & elongation of fabric and yarn lea
Capacity: 100,250,500 & 1000 kg

Additional Information:

• Minimum Order Quantity: 01 Piece

Product Details:

Standard; ASTM-D 1388
ISO- 6490             .

Product Details:

Inside SS 304 / Outside MS Power Coated            .

To find out pulling strength of any type of button & snaps alog with 3 nos. Grips with imported IMADA push pull gauge
Capcaity: 20/30 kg.
Standard: ASTM D-177

Additional Information:

• Minimum Order Quantity: 01 Piece

For color fastness against rubbing in dry or wet condition
Standards: ISO 105 12/DO2, AATCC 8/165 BS 1006 DO2

Additional Information:

• Minimum Order Quantity: 01 Piece

Product Details:

Fully SS Model
Standards: ISO 105, BS 1006
AATCC 15, 106, 107, 165

For coour dye stuff testing the effect of direct heat on the dyestuff.
120C up to 250 C temperaturerange. 3 pairs, 6 heat pads.

Product Details:

SDC,
AATCC,
and James H Heal           .

Sample holder is fixed at 45 angle. To meet the AATCC standards. Complete with all accessories including 500 ml beaker, template & marking pen for cutting specimen.

To check count of Warp/Weft of fabric sample.
Standards: ASTM D2260-96
ASTM D 3776, ISO7211, BS-2865